Call me
+86-13798169433
Home > Exhibition > Content

Exhibition

Analysis of Frame Structure of Leveler
Sinotec Digital Co.,Ltd | Updated: Oct 24, 2016

Leveling machine has two parts of the upper and lower base, these two parts is to use four support rod to connect. Support rod is installed by the screw in the four turbines in the lift, the upper end is connected with the upper frame. The lift of the turbine can be fixed to the lower frame, and there are two lifts on the side of the leveling machine, which are connected by a synchronous shaft. The worm synchronous shaft is connected with the coupling, the motor can drive the rod to lift, so that you can change the position of the base, through the encoder to detect, then the lift range is negative 5 mm to 80 mm

Home | About Us | Products | News | Exhibition | Contact Us | Feedback | Mobile | XML
Copyright ©Sinotec Digital Co.,Ltd
TEL:+86-13798169433  FAX:  Email:info@sinodigitech.com